Reset Canon MP258 Ink absorber inside the printer is almost full Error P07

FIX PRINTER ERROR "parts inside printer end service life, waste ink pad counter overflow error"

If your printer show P07 error it means that your ink absorber inside the printer is almost full. In order to solve this you need to clear or reset the counter protection of your printer. To do this, follow this steps.

First make sure that the power cable and usb cable are connected, before you perform the reset procedure. And download the resetter at the bottom of this post.

FIRST STEPS:  Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter

1. After you download the resetter, extract it and double click "servicetool.exe"
2. Load some papers in your printer and press the "Main" Button once, wait until the printing is done.
3. Then press "EEPRsaya Clear" button to clear EEPRsaya.
4. Then press EEPRsaya button and the printer will print some text.
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!

Warning: Getting rid of the error message won’t change that you might end up with ink leaking out of the printer if you don’t either replace or clean them.

 Service Tool
Download Now

OR

1.Connected POWER and USB before reset processing

2.Download this tool

3.After download is completed.You have to change a file name extension from ".doc" to ".exe"

4.Turn of the printer,wait until it stop working.

5.Press the STOP/RESET button,then press the POWER button and hold more seconds,

6.After that press the STOP/RESET button twice still press hold POWER button.

7.There after leave out from both of buttons to approach SERVICE MODE

8.Double click on the file MP258.EXE

9.It will looks like the picture,after that insert of piece of paper & press the MAIN button once,wait until printing out of paper.

10.Press an EEPRsaya CLEAR button to CLEAR EEPRsaya,after that one more paper and press an EEPRsaya button,then printer will be printed EEPRsaya to

11.When the process was completed,turn it off and turn on again.